Welcome to Floorwise UK

						Trade only

Smoothing compound type	Pro Screed F5000 2 Part Latex Smoothing Compound Plus LX - Latex Liquid	Pro Screed F5000 2 Part Latex Smoothing Compound Plus SBR – Synthetic Latex Liquid	Pro Screed F5001 Water Mix Smoothing Compound
Usage	Domestic: heavy use	Domestic: heavy use	Domestic: heavy use
	Public / commercial: heavy use	Public / commercial: heavy use	Public / commercial: heavy use
	Industrial: Light use	Industrial: Moderate use	Industrial: very heavy use
Walk-on time (approximate)	3 – 4 hours	11/2 hours	2 – 4 hours
Application thickness	Up to 6mm unfilled Up to 10mm filled	Up to 10mm unfilled 10 up to 20 mm filled	Up to 40mm unfilled
Special features	Protein free	Very low odour Protein free
Sub floor type
Sand/cement screeds	Apply direct or prime with F5004 diluted 1:2	Apply direct or prime with F5004 diluted 1:2	Prime with F5004 diluted 1:2
Stone	Apply direct or prime with F5004 diluted 1:2	Apply direct or prime with F5004 diluted 1:2	Prime with F5004 diluted 1:2
Concrete & absorbent power-floated concrete	Apply direct or prime with F5004 diluted 1:2	Apply direct or Prime with F5004 diluted 1:2	Prime with F5004 diluted 1:2
Non absorbent powerfloated concrete	Prime neat with F5004	Prime neat with F5004	Prime neat with F5004
Terrazzo, ceramic, granolithic & quarry tiles	Prime neat with F5004	Prime neat with F5004	Prime neat with F5004
Surface DPM, epoxy & Polyurethane coatings	Prime neat with F5004	Prime neat with F5004	Prime neat with F5004
Anhydrite (calcium sulphate)	Prime using epoxy primer	Prime using epoxy primer	Prime using epoxy primer
Rigid metal (non flexing, corrosion-free and clean)	Prime neat with F5004	Prime neat with F5004	Prime neat with F5004
Asphalt	Apply a slurry coat	-	-
Old bitumen residues	Apply direct	-	-
Wood blocks	Patch repair & overpin	Patch repair & overpin	Patch repair & overpin
Timber floorboards, plywood & chipboard	Patch repair & overpin	Patch repair & overpin	Patch repair & overpin

* Anhydrite screeds must be primed with an epoxy primer F5006 or F5007) prior to application of Pro Screed F5000.

In subfloors with readings of excess of 75%RH the use of surface membranes will help suppress residual moisture, dramatically improving the completion time of a project. Use the table below to choose the most suitable surface membrane and to see whether a primer/bonding agent is recommended.

Sub floor	RH	Surface membrane	Primer	Smoothing Compound
Power floated Concrete	Below 75% RH	None	Universal primer (diluted)	Pro Screed F5000 (LX or SBR)
				Pro Screed F5001
	Below 85% RH	Pro screed F5006	Universal primer	Pro Screed F5000 (LX or SBR)
				Pro Screed F5001
	Below 95% RH	Pro screed F5007	Universal primer	Pro Screed F5000 (LX or SBR)
				Pro Screed F5001
Sand/cement screed (Inc. absorbent concrete)	Below 75% RH	None	Universal primer (diluted)	Pro Screed F5000 (LX or SBR)
				Pro Screed F5001
	Below 85% RH	Pro screed F5006	Universal primer	Pro Screed F5000 (LX or SBR)
				Pro Screed F5001
	Below 92% RH	Pro screed F5006	Universal primer	Pro Screed F5000 (LX or SBR)
				Pro Screed F5001
Linoleum, vinyl, rubber (*Floorcovering to be removed)	-	No membrane	None	Pro Screed F5000 with LX
			Universal primer	Pro Screed F5000 with SBR
Textile floorcovering (*Floorcovering to be removed)	-	Check for moisture	None	Pro Screed F5000 with LX
			Universal primer	Pro Screed F5000 with SBR
Quarry tiles / terazzo Ground floor	-	Pro Screed F5006	Universal primer	Pro Screed F5000 (LX or SBR)
				Pro Screed F5001
Quarry tiles / terazzo Upper floor	-	No membrane	Universal primer	Pro Screed F5000 (LX or SBR)
				Pro Screed F5001
Asphalt	-	None	Slurry coat	Pro Screed F5000 with LX
Others	Contact local distributor or call technical services

*1 Certain adhesive residues should not be bonded over, notably tackifier, water soluble adhesives and some bitumen based adhesives.
*2 For Pro Screed F5001 application in excess of 8mm a surface membrane is recommended.