| F544
Acrylic Flooring Adhesive |
 |
•Excellent
coverage
•Low
odour
•High
Initial tack
•Greater
Strength |
All
purpose adhesive suitable for permanent bonding of vinyl,
PVC and carpets. An acrylic dispersion adhesive, formulated
to produce a high degree of initial tack. It has excellent
plasticiser resistance, is light in colour and has minimal
odour. |
Available
in 5 Kg & 15 Kg buckets. |
Coverage
approx. 13 - 17 m2 per 5 Kg bucket & 40-50 m2 per 15 Kg bucket |
Product
Data Sheet
Safety
Data Sheet
|
| F555
Multi-Purpose Flooring Adhesive |
 |
•Excellent
initial grab
•Easy
application
•Durable
bond when dry
|
This
multi-purpose adhesive is a rubber/resin based non-staining
adhesive formulated to give excellent initial grab and a
high quality, durable bond when dry. |
Available
in 15 Litre buckets. |
Coverage
approx. 45 - 55 m2 per 15 Litre
bucket |
Product
Data Sheet
Safety
Data Sheet
|
| F511
Floormaster Release Adhesive |
 |
•Covering
can be laid when adhesive is wet
•Strong
bond
Excellent
coverage
•Floor
covering and adhesive remove cleanly from subfloor |
This
water-based rubber latex release adhesive is suitable for
the installation of carpets and tiles where later removal
may be required. The adhesive forms a strong bond yet normally
allows the floorcovering and adhesive to be removed cleanly
from the sub-floor. |
Available
in 15 Litre buckets. |
Coverage
approx. 90 - 135 m2 per 15 Litre
bucket |
Product
Data Sheet
Safety
Data Sheet
|
| F522
Pressure Sensitive Acrylic Adhesive |
 |
•Permanent
tacky finish (pressure sensitive)
•Solvent
and odour free
•For
releasable or permanent bonding |
This
water-based acrylic emulsion is formulated to dry to a permanently
tacky finish. When laid into after drying, it can be used
as a release adhesive, but it can also be used for permanent
bonding if laid into wet. |
Available
in 15 Litre buckets. |
Coverage approx. 60 -
90 m2
per 15 Litre bucket |
Product
Data Sheet
Safety
Data Sheet
|
| F523
Carpet Tile Tackifier |
 |
•Easily
applied
•Fast
drying
•High
permanent tack (pressure sensitive)
•Tiles
can be lifted and replaced
|
An
acrylic dispersion adhesive for securing carpet tiles to
a variety of sub-floors, allowing tiles to be lifted and
replaced as
required. |
Available
in 5 Litre & 25 Litre polybottles. |
Coverage
approx. 40 - 60 m2
per 5 Litre & 200-300 m2 per 25 Litre container |
Product
Data Sheet
Safety
Data Sheet
|
| F539
Wood Flooring Adhesive |
 |
•Excellent
grab
•Fast
Setting
•High
bond strength
|
This
solvent-based synthetic resin adhesive adhesive for installation
of a wide range of wood floors. This universal wood flooring
adhesive is formulated to a trowelling consistency. It is
fast setting and developes a high bond strength. |
Available
in 10
Litre containers |
Approx.
25 SqM per 10 litre container using a 2mm x 6mm notch trowel,
16 SqM per 10 litre container using a 2.7mm x 5mm notch trowel |
Product
Data Sheet
Safety
Data Sheet
|
| F540
Flexible Wood Flooring Adhesive |
 |
•Long
open time
•Elastic,
high bond strength
•Excellent
grab
•Absorbs
sound
|
A solvent free one-part moisture
curing polyurethane adhesive for the installation of all
types of timbre floors. This high performance, elastic timbre
floor adhesive developes
a high bond strength, absorbs sound vibration and timbre
movements associated with seasonal climatic changes.
It is also suitable for application with underfloor heating
systems. |
Available in 7kg buckets and 600 ml cartridges. |
Approx. 25 - 45
SqM per bucket. 15
linear meters with a 5mm bead per Sausage. |
|
| F538
PVA Wood
Adhesive |
 |
•Water
resistant
•High
bond strength
•Fast
set
•Easy
application
•Conforms
to BSEN 204:1991:D3
•High
movement
|
Is
a non-plasticised, cross linking PVA emulsion adhesive specially
formulated for wood bonding in all cases where a fast set,
high bond strength and excellent water resistance are required.
Suitable for virtually all woods, wood decoratives and high
pressure laminates. Conforms
to
BS
EN 204: 1991: D3. |
Available
in 500
ml bottles |
For
T&G applications approximately 60-80 metres of 3mm single
bead per 500ml bottle. |
Safety
Data Sheet
|
| F580
Contact Adhesive |
 |
•High
initial grab
•High
shear strength
•Good
temperature resistance
•Fast
drying
|
A
versatile synthetic rubber/resin contact adhesive for bonding
floorcoverings, nosings and covings to a wide range of surfaces. |
Available
in 5
L lever lid tins |
Approx.
5.5SqM/litre |
Product
Data Sheet
Safety
Data Sheet
|
| F533
Carpet Latex Adhesive |
 |
•Non
flammable
•Good
adhesive properties
•Fast-break
|
A
high solids content, fast-break rubber emulsion for bonding
edges and seams of carpets and
underlays. It dries to form a strong, elastic film with good
adhesive properties. |
Available
in 5
L polybottles |
Approx.
27.5 SqM on a single non-porous surface per 5 Litre can. |
Product
Data Sheet
Safety
Data Sheet
|
| F577
Floor-fix Mastic Adhesive |
 |
•High
initial grab
•Excellent
gap filling properties
•Excellent
bond strength
•Bonds
to most substrates
|
Gun-grade
high strength adhesive with gap-filling qualities. |
Available
in 380
ml cartridges |
Approx.
12.5 meters of 6 mm bead per cartridge |
Product
Data Sheet
Safety
Data Sheet
|
| F579
Fast-set Floor-fix PU Adhesive |
 |
•Quick
grab adhesive
•For
interior and exterior use
•Excellent
bond strength
•Bonds
to most substrates
|
A
fast setting, high strength polyurethane adhesive for interior
and exterior applications. The adhesive provides excellent
bond strength and can be used with a wide range of substrates. |
Available
in 310
ml cartridges |
Approx.
40 meters of 3mm bead per 310 ml cartridge |
Product
Data Sheet
Safety
Data Sheet
|
| F500
Silicone Joint Sealant |
 |
•Interior
and exterior applications
•High
movement accommodation
•Excellent
adhesion
•Lasts
up to 25 years
•Contains
fungicide
|
The
silicone joint sealant, which provides a waterproof, hygienic,
flexible
seal, resistant to mildew and mould growth.
|
Available
in 310
ml cartridges
|
Approx.
11 meters of 6mm bead per cartridge
|
Product
Data Sheet
Safety
Data Sheet
|
| F599
Spray Adhesive |
 |
•Excellent
bond strength
•Adjustable
spray nozzle
|
This
versatile SBR polymer spray adhesive can be used to fix a
wide variety of floorcoverings onto most sub floors. |
Available
in 500
ml aerosol cans |
Approx.
3 SqM per can (single non-porous surface) |
Product
Data Sheet
Safety
Data Sheet
|
| F595
Antiplas Spray Adhesive |
 |
•High
tack
•Adjustable
spray nozzle
•Plasticiser
resistant
|
High plasticiser resistant, this specially
formulated acrylic spray adhesive can be used for
fixing all types of vinyl floorcoverings onto most
sub floors. |
Available
in 500
ml aerosol cans |
Approx.
3 SqM per ca (single non-porous surface) |
Product
Data Sheet
Safety
Data Sheet
|
| F591
Wonderspray Contact Adhesive |
 |
•Powerful
action
•Fast
acting
•Effective
on most organic substrates
|
Acrylic
adhesive for sticking vinyl backed floors. |
Available
in 500
ml aerosol cans |
Approx.
3SqM per can |
|
| F590
Adhesive Remover |
 |
•Powerful
action
•Fast
acting
•Effective
on most organic substrates
|
A
powerful solvent based cleaner to quickly remove adhesive,
oils, grease and many other organic substances. |
Available
in 500
ml nozzle- adjustable aerosol cans |
|
|
